Seal Pullers
Displaying 1 to 9 (of 9 products)
Lisle 56920 Limited Access Seal Puller
Use With 3/8 Drive for Hard-to-reach Oil and Grease Seals. Simply insert hook behind seal and pull. Two hook sizes to fit most oil and grease seals. Can also be used with a breaker bar for extra reach or leverage. If the puller tips wear, resharpen…
Lisle 80200 Hose Remover Set, 4 Pc.
Set contains long, short, standard and offset hooks. Can be used for pulling rubber hoses on vacuum lines, fuel lines, heater hoses, moldings, o-rings and gaskets. Long pullers are 13" long.
Lisle 80230 Short Offset Hose Remover
Can be used to remove hoses, moldings, clips, clamps, seals, o-rings, cotter pins, gaskets, etc. Handles are dual material for comfort and grip. Rods are heat-treated for strength and plated for durability.
Lisle 56650 Adjustable Seal Puller
Head Adjusts to 5 Positions. Two hook sizes easily remove most oil and grease seals. Where clearance is a problem, remove the pin to reposition the head. The adjustable head works great on front wheel drive transaxles. Also works on front crankshaft …
Lisle 56750 Seal Puller
Pulls oil and grease seals. Simply insert the tip of the tool behind the oil or grease seal, press and pull. Leverage works for you. Two size tips reach in and fit nearly all seal applications.
Lisle 80210 Short Hose Remover
Can be used to remove hoses, moldings, clips, clamps, seals, o-rings, cotter pins, gaskets, etc. Handles are dual material for comfort and grip. Rods are heat-treated for strength and plated for durability.
Lisle 80220 Long Hose Remover
Can be used to remove hoses, moldings, clips, clamps, seals, o-rings, cotter pins, gaskets, etc. Handles are dual material for comfort and grip. Rods are heat-treated for strength and plated for durability.
Lisle 80240 Long Offset Hose Remover
Can be used to remove hoses, moldings, clips, clamps, seals, o-rings, cotter pins, gaskets, etc. Handles are dual material for comfort and grip. Rods are heat-treated for strength and plated for durability.
OTC Tools & Equipment 27794 Driver Tools Basic Set
Custom-made Driver Tools Now you can have the proper-size driver for nearly any auto-motive seal, bearing, or bushing installation job. These sets include discs and handles, spacers and drivers. Discs range from 1/2" to 4-1/2" in diameter, in 1/16" …
Displaying 1 to 9 (of 9 products)