Valve Tools
Displaying 1 to 25 (of 40 products)
Lisle 14100 Valve Core Tool
Removes and installs valve cores and valve core caps. The double ended core driver reverses in the tool body. The reversible driver fits both large and small valve cores. Use the reverse end to remove and install valve core caps. The long too…
Lisle 15190 5.7IN Long Valve Core Tool
Heat-treated steel tip for removing and installing standard valve cores A dual durometer handle for comfort with a rotating knob on the end allowing the tool to turn smoothly while applying pressure with the palm of your hand The 5.7IN long tool ca…
Lisle 18810 Valve Core Torque Tool
Properly Installs and Removes Valve Cores, Including Late Model Vehicles with the Tire Pressure Monitoring System (TPMS) Torque tool is set to 4 inch pounds, to prevent under and over torqueing the valve core Helps prevent valve core leaks causing …
Lisle 19860 Tire Deflator Set for TPMS Valve Stems
Quickly evacuates air from tires without removing valve core Simply replace a standard sized valve cap with this handy tool and the special design will depress the pin in the valve tool and the special design will depress the pin in the valve core …
Milton Industries 404-100 Valve Core 5/bag, 100/box
TR-C1, Thread size: .2108-36, red Teflon seal, Operating temp. -40 F- 302 F, operating pressure: 0-200 PSI
Milton Industries 476 Oval Slot Tubeless Valve
Tubeless tire valve for oval slot specifically designed for the Firestone 16 x 6KS wheel with an oval valve hole. Valve is ready to use with grommet, washer, valve, core, hex nut and screwdriver cap. For best results, the rim valve hole should be che…
Milton Industries 482 Truck & Bus Clamp in Tubeless Tire Valve, 1-21/32"
TR 501 effective length 1-21/32"
Milton Industries 483 Truck & Bus Clamp in Tubeless Tire Valve, 2-5/32"
TR 500 effective length 2-5/32"
Milton Industries 484 Truck & Bus Clamp in Tubeless Tire Valve, 3-9/32"
TR 570 effective length 3-9/32"
Milton Industries 485 Truck & Bus Clamp in Tubeless Tire Valve, 3-9/32"
TR 572 effective length 3-9/32"
Milton Industries 486 Truck & Bus Clamp in Tubeless Tire Valve, 4-17/32"
4-17/32 Long Truck and Bus Clamp In Tubeless Tire Valve
Milton Industries 492 Tubeless Valve
TR 510 Used in drop center aluminum disc wheels with 5/8" bottom valve hole.
Milton Industries S-443 Valve Extractor Tool
For removal of valve cores 1/4" threaded inlet Length: 5 1/8", 6 3/4" extended
Milton Industries S404 Valve Core 5/ bag
TR-C1, Thread size: .2108-36, red Teflon seal, Operating temp. -40 F- 302 F, operating pressure: 0-200 PSI
Milton Industries S409 Hi Performance Tire Valve
For use with Mag, aluminum, exposed or reversed chrome wheels. Clamp-in type, brass chrome plated. Two grommets to fit .453 or .625 valve holes.
Milton Industries S413 Tubeless Tire Valve, 1 1/4" length, 2/cd
TR 413, Snap in type, Cap thread size: .305-32, max. cold inflation pressure not to exceed 60 PSI
Milton Industries S414 Tubeless Tire Valve, 1 1/2" length, 2/cd
TR 414. Snap in type, Cap thread size: .305-32, max. cold inflation pressure not to exceed 60 PSI
Milton Industries S415 Tubeless Tire Valve, 1 1/4" length, .625" hole diameter, 2/ cd.
TR 415, Snap in type, Cap thread size: .305-32, max. cold inflation pressure not to exceed 60 PSI
Displaying 1 to 25 (of 40 products)