Description:
Get the ACDelco 4L590 Accessory Drive Belt for your vehicle. Buy now and secure your purchase online!
ACDelco Professional, premium aftermarket Lawn and Garden V-Belts have superior length stability for minimal take-up requirements and flex-bonded cords that are strongly bonded to the body of the belt resulting in equal load distribution. They are suitable for all industrial light duty applications, usually using fractional horsepower (FHP) motors, and provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. These premium aftermarket replacement lawn and garden v-belts are manufactured to meet your expectations for fit, form, and function. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Has flex-bonded cords that are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Meets or exceeds RMA standards for static conductivity and heat and oil resistance
- Provides proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life
- The belt's cover is a patented construction for longer cover life, providing extended protection to the core of the belt from oil, dirt, and heat
Specifications:
Cross Section Designation:
2590
Effective Length:
1498 mm
Effective Length:
58.96 in.
Measurements:
1/2 in x 59
Outside Circumference:
1499 mm
Outside Circumference:
59.00 in.
Features and Benefits:
- – Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles.
- – Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration.
- – Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure.
- – Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles.
- – Use an approved tension gauge to check belt tension.
Specifications:
