Description:
The ACDelco GM Original Equipment Hydraulic Brake Line Kits contain metal hydraulic brake pipes. They are made from special double wall steel tube, and the connections are threaded with inverted (SAE) or bubble (ISO) flares, which provide a leak-free connection. These original equipment brake hydraulic lines have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- GM-recommended replacement part for your GM vehicle's original factory component
- Manufactured to GM OE specification for fit, form, and function
- Nylon Coating for better corrosion protection
- Offering the quality, reliability, and durability of GM OE
- Pre-formed and pre-flared for easy installation
Specifications:
Line Fitting Diameter:
0.5 in.
Outer Sheathing Material:
No
Tube 1 Length (in):
79.97 in
Tube 2 Length (in):
84.17 in
Tube 3 Length (in):
80.96 in
Tube 3 Length (mm):
2056.44 mm
Tube 4 Length (in):
96.46 in
Tube 4 Length (mm):
2450 mm
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems.
- The following should be conducted by a qualified technician:
Specifications:
