Displaying 1 to 15 (of 15 products)
Carburetor pin tool removes, retains and installs carburetor linkage pins including E clips and other small parts.
Brand: | Lisle |
Part #: |
46500 |
UPC: |
083045465003 |
Weight: |
0.25 lbs |
Condition: | New |
For adjusting idle/mixture screws on many GM and Chrysler vehicles with carburetors. Includes: Carburetor adjusting tool, "Double D" adapter for Gm '79 thru present, 1/4" hex adapter for pre '78 GM, 3/32" hex adapter for '78 thru present Chrysler 1.7…
Brand: | Lisle |
Part #: |
55250 |
UPC: |
083045552505 |
Weight: |
0.31 lbs |
Condition: | New |
Brand: | Lisle |
Part #: |
55300 |
UPC: |
083045553007 |
Weight: |
2.39 lbs |
Condition: | New |
Tool easily adjusts GM C-4 carburetor idle-mixture screws. A flexibleshaft lets you reach hard-to-get-at screws. Reversible bit fits DoubleD and hexhead screws.
Brand: | KD Tools |
Part #: |
2776 |
UPC: |
082171027765 |
Weight: |
0.15 lbs |
Condition: | New |
For all 1979 and up GM vehicles with carburetors Fits idle/ mixture screws Flexible shaft tool makes reaching and adjusting idle/mixture screws easy. One end fits Double-D screws and the other fits 4.5mm hex heads. Two tools in one. Sliding handle …
Brand: | Thexton |
Part #: |
350 |
UPC: |
008721003508 |
Weight: |
0.1 lbs |
Condition: | New |
High performance aerosol cleaner designed to penetrate and remove gums, oil, and varnish from automatic chokes and carburetor assemblies. Its high delivery rate flushes away loosened deposits. Can not be sold in California. Use 08866 for California.
Brand: | 3M Company |
Part #: |
8796 |
UPC: |
051135087961 |
Weight: |
1.03 lbs |
Condition: | New |
Includes sizes 14, 16 and 20 Deutsch connectors, both male and female Tap live readings with included 48 inch stacking banana plug test leads
Use on 12V to 48V circuits Performs voltage drop test with the push of a button High corrosive resistance Shorts to ground Open circuits 60" long test leads
Maxi Relay Adapter features: allows testing of heavy duty 4-pin Maxi relays commonly used in heavy duty equipment, branch power circuits and cooling fans relay adapter plugs into relay buddy first relay then plugs into the top of the adapter
Fuse Buddy Mini Kit
Live RPM readings on small engines with settable update rate twice per second or once per second Max RPM is viewable and resettable RPM range: 0-20,000 Engine hour meter which can be used for service reminders: can be set from 0-200 hours Wate…
For 2mm, 7mm, 10mm double-D and 2.5mm hex fittings. Tools fit Varajet, Dualjet and Quadrajet carburetors. Adjusts or removes throttle position sensor (TPS), idle air bleed, mixture control solenoid and main metering jets. For use with 7/16 and 1/2 de…
Brand: | Thexton |
Part #: |
362 |
UPC: |
008721003621 |
Weight: |
0.2 lbs |
Condition: | New |
Sockets fit all 1979 & up GM and 1981 & up Ford carburetors, they also fit GM double-D, GM 4.5mm hex and Ford 3/32" hex adjusting screws. Snaps on to all 1/4" drive fixed or flexible drivers.
Brand: | Thexton |
Part #: |
379 |
UPC: |
008721003799 |
Weight: |
0.05 lbs |
Condition: | New |
Pierces wire insulation sized from 22 to 14 AWG
Carburetor Base Wrench 10mm x 12mm 12pt. box, thin
Brand: | Vim |
Part #: |
V392 |
UPC: |
092308392031 |
Weight: |
0.38 lbs |
Condition: | New |
Displaying 1 to 15 (of 15 products)