Displaying 1 to 25 (of 90 products)
Dual overhead cam lock tool locks camshaft sprockets in place during belt / chain replacement This versatile tool easily locks and holds both camshaft sprockets firmly in place The two parallel bars float which allows the knurled pins to align with…
Brand: | Lisle |
Part #: |
36880 |
UPC: |
083045368809 |
Weight: |
0.63 lbs |
Condition: | New |
Drives Camshaft Bearings Smoothly. Now, one complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks. Range of 1.125 to 2.69 (28.58 - 68.3mm). EASY ON BEARINGS. The expander has a neop…
Brand: | Lisle |
Part #: |
18000 |
UPC: |
083045180005 |
Weight: |
17 lbs |
Condition: | New |
Brand: | Lisle |
Part #: |
18040 |
UPC: |
083045180401 |
Weight: |
1.17 lbs |
Condition: | New |
Collet for 18000 Camshaft Bearing Tool
Brand: | Lisle |
Part #: |
18080 |
UPC: |
083045180807 |
Weight: |
0.93 lbs |
Condition: | New |
Replacement accessory for 18000 Universal Camshaft Bearing Tool
Brand: | Lisle |
Part #: |
18330 |
UPC: |
083045183303 |
Weight: |
0.54 lbs |
Condition: | New |
For Universal Camshaft Bearing Tool (18000)
Brand: | Lisle |
Part #: |
18350 |
UPC: |
083045183501 |
Weight: |
0.18 lbs |
Condition: | New |
Brand: | Lisle |
Part #: |
18390 |
UPC: |
083045183907 |
Weight: |
0.5 lbs |
Condition: | New |
Brand: | Lisle |
Part #: |
18420 |
UPC: |
083045184201 |
Weight: |
0.02 lbs |
Condition: | New |
For Small Cylinders: 1 1/2" to 3" (38.1-76.2mm) Quality tool at a low price. Takes all the rings at one setting.
Brand: | Lisle |
Part #: |
18500 |
UPC: |
083045185000 |
Weight: |
0.31 lbs |
Condition: | New |
Applications include 3.7L - 2009 and newer. Helps ensure Camshaft alignment during removal of the timing chain Helps ensure Camshaft alignment duringinstallation of the timing chain
Brand: | Lisle |
Part #: |
37100 |
UPC: |
083045371007 |
Weight: |
2.38 lbs |
Condition: | New |
For Servicing the Timing Belt, Chains, Head Gaskets or Other Valve Train Repairs on Ford, Mercury and Mazda Vehicles. The kit comes with an aluminum camshaft bar, plus one short top dead center (TDC) timing pin and one long TDC timing pin.
Brand: | Lisle |
Part #: |
37410 |
UPC: |
083045374107 |
Weight: |
1.5 lbs |
Condition: | New |
For Use When Servicing the Timing Chain on GM 2.8, 2.9, 3.0, 3.5, 3.6, 3.7, and 4.2L Engines. Helps Ensure Camshaft Alignment During Timing Chain Removal and Installation. Plates 1, 2 and 3 work on 2.8L, 3.0L and 3.6L high feature V6 engines. Plate 4…
Brand: | Lisle |
Part #: |
37530 |
UPC: |
083045375302 |
Weight: |
2.1 lbs |
Condition: | New |
Adjusts to Fit Different Sized Cam Sprockets This adjustable tool is designed to both hold and turn cam sprockets The tool is needed to turn the cam sprockets to adjust the cam position It can also be used to hold the cam sprocket in place when re…
Brand: | Lisle |
Part #: |
38220 |
UPC: |
083045382201 |
Weight: |
1.13 lbs |
Condition: | New |
Brand: | OTC |
Part #: |
536172 |
Weight: |
0.97 lbs |
Condition: | New |
4.6 5.4L CAM POSITIONING TOOL CNVIC VAN EXPD FTRCK NAV GMRK Ford 303-380
Brand: | OTC |
Part #: |
6009 |
UPC: |
0731413031786 |
Weight: |
2.2 lbs |
Condition: | New |
Camshaft Position Adapter
Brand: | OTC |
Part #: |
6020 |
UPC: |
0731413032547 |
Weight: |
0.5 lbs |
Condition: | New |
Ford Crankshaft Positioning Tool Designed for use on Ford 19932004 4.2L, 4.6L 2-valve, 4.6L 4-valve, 5.4L V8, and 6.8L V10 engines when installing timing chains. These engines are not free-wheeling, and if an engine has jumped time, it is possible t…
Brand: | OTC |
Part #: |
6024 |
UPC: |
0731413032554 |
Weight: |
0.7 lbs |
Condition: | New |
Includes: OTC-7208A Hub remover to push the axle shaft from the front hub OTC-7135A Installer is used to pull the axle shaft into the front hubs on Ford vehicles. Fits axle shafts with 20mm X 1.5 thread. OTC-7924A Installer is used to pull the…
Brand: | OTC |
Part #: |
6298 |
UPC: |
0731413038457 |
Weight: |
7.3 lbs |
Condition: | New |
Brand: | OTC |
Part #: |
6466 |
UPC: |
0731413037498 |
Weight: |
0.1 lbs |
Condition: | New |
Applications include: 19941995 Mustang (3.8L V6), 1989-1995 Thunderbird Supercharged, 1990-1995 Thunderbird (3.8L V6), 1989-1995 Cougar Supercharged (3.8L V6), 1990-1995 Cougar (3.8L V6), and 1995 Windstar (3.8L V6). Ford Tool Part No.: T89P-12…
Brand: | OTC |
Part #: |
6467 |
UPC: |
0731413037504 |
Weight: |
0.1 lbs |
Condition: | New |
Cam pulley holding tool for use on 19931997 Probe 2.0L 4 cyl.
Brand: | OTC |
Part #: |
6468 |
UPC: |
0731413037511 |
Weight: |
0.1 lbs |
Condition: | New |
Applications include: 1997-2002 Econoline (4.2L V6), 1997-2002 F-Series Truck (4.2L V6), 1996-1998 Explorer (5.0L V8), 1996-1998 Mountaineer (5.0L V8), 1996-1998 Mustang (3.8L V6), 1997 Thunderbird (3.8L V6), 1997 Cougar (3.8L V6), and 1996-1998 …
Brand: | OTC |
Part #: |
6469 |
UPC: |
0731413037528 |
Weight: |
0.3 lbs |
Condition: | New |
3.8 5.0L Sensor Synchronizing Tool Explorer Mustang Windstar
Brand: | OTC |
Part #: |
6470 |
UPC: |
0731413037535 |
Weight: |
0.4 lbs |
Condition: | New |
3.0L Cam Sensor Synchronizing Tool Taurus Sable
Brand: | OTC |
Part #: |
6471 |
UPC: |
0731413037542 |
Weight: |
10 lbs |
Condition: | New |
Applications include: 1995-1997 Aerostar (3.0L V6), 1996-1998 Aerostar (4.0L V6), 1996-1998 Explorer (4.0L V6), 1995-1997 Ranger (3.0L V6), 1996-1998 Ranger (4.0L V6), 1996-1997 Taurus (3.0L V6 2-Valve), 1996-1997 Sable (3.0L V6 2-Valve), and 1995-…
Brand: | OTC |
Part #: |
6472 |
UPC: |
0731413037559 |
Weight: |
0.3 lbs |
Condition: | New |
Displaying 1 to 25 (of 90 products)