Description:
HELLA PAGID Brake Discs are designed to precisely reflect the requirements of various vehicle types, brake systems, engine outputs, driving loads, and braking characteristics.
Features and Benefits:
- Better handling, driving comfort and less load on suspension parts through reduction of unsprung masses
- Fixing screws are always included if required
- Full range is 100% fully coated with premium zinc rust protection
- Full range is 100% high carbon (GG15 & GG20)
- Higher driving comfort with reduced machining tolerances
- Improved aesthetics and appearance of brake discs, especially when used with aluminum rims
- Increased carbon content for increased heat conductivity and better mechanical properties
- Increased fuel efficiency through weight reduction by up to 20%
- Less fading and quiet braking
- Manufactured according to European OE specifications (AM1 & AM2)
- Not oiled, no degreasing from preservative oil before fitting, saving time and money in the workshop
- Reduced braking noise
Specifications:
ABS Tone Ring Included:
No
Assy./disassy. by qualified personnel required!:
.
Balancing Type:
Mill Balancing
Bolt Hole Circle [in]:
4.72
Bolt Hole Circle [mm]:
120
Brake Disc Thickness [in]:
1.18
Brake Disc Thickness [mm]:
30
Brake Disc Type:
Internally Vented
Brake Disc Type:
Two-Piece Brake Disc
Center Hole Diameter:
120.0
Centering Diameter [in]:
3.11
Centering Diameter [mm]:
79
Directional or Non-Directional Brake Surface:
Non-Directional
Discard Thickness:
28.40 mm
Hole Arrangement/Number:
05/06
Inner Diameter [in]:
7.24
Material:
gray cast iron & alum hat
Minimum thickness [mm]:
28.4
Mounting Bolt Hole Circle Diameter:
120.00 mm
Mounting Bolt Hole Quantity:
6
Nominal Thickness:
30.00 mm
Number of bolts/screws:
1
Outer Diameter [in]:
14.57
Outside Diameter:
370.00 mm
Rust Resistant Coating:
Yes
Solid Or Vented Type Rotor:
Vented
Supplementary Article/Info 2:
without Wheel Hub
Supplementary Article/Info 2:
without Wheel Studs
Surface:
Coated Degrees Celsius, Centigrade
Technical Information Number:
65146PRO_HC
Wheel Bolt Bore [mm]:
16.5
Brembo North America #:
09C39913
FREMAX BRAKE ROTORS AND DRUMS #:
BD3569
Manufacturer Warranty:
12 Months
