Description:
ACDelco Gold (Professional) Fuel Pump and Sender Assemblies are a high quality alternative to Original Equipment (OE) parts. A fuel pump and sender assembly is submerged inside of a fuel tank which is common among most electronic fuel-injected vehicles. This is comprised of a connector, pump body, and fuel lever sender. A connector is located near the top of the fuel tank, which is used to supply power and ground for the fuel pump and sensing wires of the fuel level sender. The pump body is where an electric motor is mounted to a small vein pump which picks up gas and then pressurizes the fuel system. The fuel level sender is attached to the fuel pump housing. This float rides on the fuel level while the sensing resistor provides feedback data for the fuel gauge. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Premium aftermarket replacement part
- Provides steady reliable fuel supply
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Supplies precise measurement of fuel levels in tank
Specifications:
Connector Shape:
Oval, Square
Inlet Diameter (in):
0.38 in
Inlet Diameter (mm):
9.53 mm
Inlet Header Length (mm):
9.53 mm
Inlet Type:
Male Quick Connect
Maximum Pressure:
55.11 lb per Square in.
Outlet Diameter (in):
0.31 in
Outlet Diameter (mm):
7.94 mm
Outlet Type:
Male Quick Connect
Seal And Lock Ring Included:
Yes
Volume (cu in):
765.08cu in
Features and Benefits:
- – Before installation, ensure the area is clear of dirt and debris, especially the mating surface where the new seal will be placed.
- – Regularly inspect fuel pump and sender assemblies for signs of damage or wear, and replace them if signs of damage are found
- – Replace fuel filter at manufacturers recommendation
- – Use only recommended fuel additives
- – Use recommended octane fuel for your vehicle
Specifications:
