Description:
ACDelco Professional, premium aftermarket Industrial Belts feature a composite, multi-purpose construction that is resistant to oil, heat, ozone, sunlight, weather, and aging. They are suitable for all industrial applications, including V-flat drives. Their flex-bonded cords are strongly bound to the body of the belt resulting in equal load distribution. ACDelco Professional Industrial Belts provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. These premium aftermarket replacement industrial belts are manufactured to meet your expectations for fit, form, and function. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Has flex-bonded cords that are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Meets or exceeds RMA standards for static conductivity and oil and heat resistance
- Provides proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life
- The belt cover is a patented fabric construction for longer cover life, providing extended protection to the belt core from oil, dirt, and heat
Specifications:
Cross Section Designation:
A29
Outside Circumference:
31.00 in.
Outside Circumference:
787.0 mm
Features and Benefits:
- – Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles.
- – Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration.
- – Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure.
- – Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles.
- – Use an approved tension gauge to check belt tension.
Specifications:
