Brands Vehicles
Lowest Prices
Free Returns
Online Since 2009
Shopping for

1985 Pontiac T1000

X

ACDelco 41-809 Spark Plug
for 1985 Pontiac T1000 1.6L L4 Gas SOHC

ACDelco 41-809 Spark Plug - 1985 Pontiac T1000

ACDelco
Brand:ACDelco
Part Number: 41-809
UPC: 021625488479
Weight: 1 lbs
Condition:New



On Sale:

$9.83

Availability:
1 in Stock
Warehouse: US-7
Quantity:

Product Information

Description:

Get the ACDelco 41-809 Spark Plug for your 1985 Pontiac T1000. Buy now and secure your purchase online!

ACDelco Professional Double Platinum Spark Plugs are premium aftermarket plugs, and are the high quality replacement ideal for many vehicles on the road today. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

When it comes to replacing your spark plugs, ACDelco offers a full line of Professional premium aftermarket and Specialty spark plug products. Whether you are choosing from our Iridium, Double Platinum, RAPIDFIRE Single Platinum, Conventional, Glow Plug, Marine, or Outdoor Power Equipment lines, you will know that you are getting a centurys worth of experience and know-how packed into that plug. ACDelco Professional premium aftermarket and Specialty spark plugs fit both GM and non-GM vehicles.

When it comes to replacing your spark plugs, ACDelco offers a full line of Professional, premium aftermarket Spark Plug products. Choose from our Iridium, Double Platinum, RAPIDFIRE Single Platinum, Conventional, Marine, and Outdoor Power Equipment lines depending on your performance needs. Diesel vehicle owners can also get the ACDelco advantage with our high-quality Glow Plugs. ACDelco Professional, premium aftermarket spark plugs fit both GM and non-GM vehicles.

Features and Benefits:

  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Visually inspect spark plugs for signs of wear. Follow these steps for removing spark plugs for inspection, servicing or replacement:
  • – Apply dielectric grease into the boot area to reduce the chance of exterior tracking on the buttress tower of the spark plug. This grease also promotes a good heat transfer between the spark terminal screw and boot terminal.
  • – Before installing new spark plugs, use a gap guide to make sure your new spark plugs have the correct gap. NOTE: ACDelco Professional Iridium Spark Plugs are pre-gapped during manufacturing. Never attempt to gap an ACDelco Professional Iridium Spark Plug. You could damage the spark plug. Replace any incorrectly gapped ACDelco Professional Iridium Spark Plugs with plugs that are correctly gapped.
  • – Brush or air blast dirt away from the well areas before removing spark plugs. CAUTION: Use goggles to protect eyes from debris when applying compressed air to spark plug wells.
  • – Grasp the spark plug boot and gently rotate it 90 degrees counterclockwise. Pull the spark plug boot and cable away from the spark plug. If necessary, use a spark plug boot removing tool. DO NOT grab or violently pull spark plug cables.
  • – Install spark plugs or glow plugs to the proper torque per the manufacturers specification.
  • – Remove each spark plug and place each one in a tray by cylinder number. This will help identify and relate any unusual condition to the cylinder involved.
  • – Use the correct deep socket size to loosen each spark plug one or two turns. NOTE: To remove spark plugs from aluminum heads, allow the engine to cool. The heat of the engine, in combination with a spark plug that is still hot, may cause the spark plug threads to strip the cylinder head upon removal.

Specifications:

Center Electrode Core Material:
Copper
Center Electrode Tip Material:
Platinum
Gap Size:
0.037 in.
Gap Size:
0.95 mm
Ground Configuration:
Single
Ground Electrode Core Material:
Nickel Alloy
Ground Electrode Quantity:
1
Ground Electrode Tip Design:
Single Prong Electrode
Hex Size:
16mm
Insulator Height:
2.48 in.
Insulator Height:
63 mm
Product Type:
Double Platinum
Pack Of:
1
Reach:
0.44 in.
Reach:
0.441 in.
Reach:
11.2 mm
Resistance:
3-10K ohms
Resistor Type:
Yes
Seat Type:
Conical
Thread Diameter:
0.551 in.
Thread Diameter:
14 mm

Manufacturer Warranty:

7 Year / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

ACDelco 41-809 Spark Plug compatibility with your 1985 Pontiac T1000...

Last Updated: 07/20/2019

Years Vehicle Per Vehicle Fit NotesFitment Notes

1987

 

1986

 

1985

 

1984

 

1983

 

1982

 

1981

 

1987

 

1986

 

1985

 

1984

 

1983

 

1982

 

1981

 
Pontiac T1000

1.6L L4 Gas SOHC
4
 
Professional-Double Platinum-Reman=No-US ACD=Y-Can ACD=Y-
Gap .035
 

Pontiac T1000



1.6L L4 Gas SOHC Professional-Double Platinum-Reman=No-US ACD=Y-Can ACD=Y-
Gap .035

4 Per Vehicle

Didn't find a match for your vehicle?

  See Other Choices