Description:
ACDelco Professional Power Steering Pressure Line Hose Assemblies are premium aftermarket replacement assemblies which effectively transfer high pressure power steering fluid from the vehicles power steering pump to the power steering gear or rack and pinion assembly. Every power steering hose assembly comes complete with hoses, zinc or plated end fittings, brackets, sensor ports, sheathing, bushings, and grommets where required. Extensive field examination and testing has been carried out to assure the proper fit for many vehicles on the road today. These premium aftermarket replacement power steering pressure line hose assemblies are manufactured to meet your expectations for fit, form, and function.
ACDelco Professional Power Steering Products are the ideal replacement parts when you need uncompromising quality and solid value. From newly manufactured power steering hoses, seals, and steering pump rebuild kits, to remanufactured power steering pumps, rack and pinion assemblies, and integral steering gears, ACDelco Professional Power Steering Products offers a full line of Professional, premium aftermarket steering products to make part replacement simple and precise. Turn to ACDelco Professional Power Steering Products for high-quality, long-lasting components for GM vehicles as well as a wide range of other vehicles on the road today.
Features and Benefits:
- Built-in shock absorbing characteristics in hose help ensure proper resistance to fluid surges
- Double-lock beading tube end provides crimping and assists in leak prevention for hose/coupling integrity
- End-lock tabs position hose for accurate alignment and routing
- Fluid restrictors help absorb vibration and reduce noise
- High tensile strength braided fabric help the lines withstand pulsation pressures up to 1,500 psi and bursting pressure up to 8,900 psi
- Hose assembly is engineered with a muffler to act as a pump noise suppressor, helping assure quiet operation where required
- Hose cover is highly resistant to oil, heat, and ozone - conditions which cause ordinary hoses to fail prematurely
- Movable mounting brackets allow easy and secure installation
- Original style fitting means that no adapters are required
- Silver heat guard helps protect hose in high-temperature areas
- Split conduit (convoluted) hose protects vital areas
- Switch sockets allow reinstallation of original equipment pressure sensors
- Unique crimping methods ensure uniform connections between hose and end fittings
- Zinc-aluminum alloy with an aluminum-rich epoxy top coating on tubes helps protect against rust and corrosion
- – After any service of the power steering system, always bleed the air from the system and verify proper system operation. An accurate fluid level cannot be obtained unless air is bled from the steering system. The air in the fluid may cause pump cavitation noise as well as pump damage over a period of time.
- – Always check the specific manufacturers service information for the correct power steering fluid to use. Different fluids are specified by the manufacturers to meet the operating requirements of their power steering systems. On some modern steering systems, brake fluids or transmission fluids may not be compatible with pump components. Using the wrong fluid could cause hose and seal damage as well as fluid leaks.
- – Check power steering fluid levels periodically and add fluid when necessary.
- – Have your vehicle inspected if it exhibits any of the following symptoms: unusual noise when turning the steering wheel, a shimmy or shake in the steering wheel, heavy or unresponsive steering at low speeds or during parking lot maneuvers, and/or the steering wheel does not return to 'center' properly.
- – Hoses should be replaced after 20,000 - 24,000 miles as preventative maintenance.
- – If you live in areas that experience harsh, winter weather, have the entire steering system inspected before winter arrives to help ensure safer driving.
- – Inspection of power steering hoses eliminates expensive repairing or replacing of the pump or other components.
- – It is a good idea to replace O-rings when doing any steering system service. Reusing old O-rings can cause leaks.
- – Keep in mind that regardless of the original color of new power steering fluid, all fluids will darken in color during use. Fluid color is not an indication of fluid condition.
Specifications:
End 1 Fitting Thread Diameter:
0.3125 in.
End 1 Fitting Thread Diameter:
7.9 mm
End 1 Type:
Male Inverted Flare
End 2 Fitting Thread Diameter:
0.63 in.
End 2 Fitting Thread Diameter:
16 mm
Hose Shape:
Molded Assembly
Keyword Search:
ACDelco; Professional Power Steering Pressure Line Hose Assembly; Power Steering Pressure Line Hose; Power Steering Pressure Line Hose Assembly; Pressure Line Hose; Pressure Line Hose Assembly
Mounting Brackets Included:
No
Manufacturer Warranty:
24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.
