Description:
ACDelco Professional, premium aftermarket Power Steering Pump Rebuild Kits include housing O-rings, external reservoir O-rings, pressure union O-ring fittings, a drive shaft bushing/bearing, and a drive shaft seal for ACDelco Professional Power Steering Pumps. This premium aftermarket rebuild kit contains high quality replacements for many vehicles on the road today and meets the performance standards you would expect from ACDelco. WARNING: Using this product can expose you to 1,3-Butadiene, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
ACDelco Professional Power Steering Products are the ideal replacement parts when you need uncompromising quality and solid value. From newly manufactured power steering hoses, seals, and steering pump rebuild kits, to remanufactured power steering pumps, rack and pinion assemblies, and integral steering gears, ACDelco Professional Power Steering Products offers a full line of Professional, premium aftermarket steering products to make part replacement simple and precise. Turn to ACDelco Professional Power Steering Products for high-quality, long-lasting components for GM vehicles as well as a wide range of other vehicles on the road today.
Features and Benefits:
- Provides the performance and dependability you expect from ACDelco
- Rebuilding with a set of high-quality replacement power steering pump components can help improve performance without the cost of purchasing and installing a completely new pump
- Thoroughly engineered to meet or exceed your expectations for fit, form, and function
- – After any service of the power steering system, always bleed the air from the system and verify proper system operation. An accurate fluid level cannot be obtained unless air is bled from the steering system. The air in the fluid may cause pump cavitation noise as well as pump damage over a period of time.
- – Always check the specific manufacturer's service information for the correct power steering fluid to use.
- – Always follow the manufacturer's specific instructions on flushing, but remember the following: always flush out the power steering fluid in the lines before removing the old pump and be ready with two or more quarts of power steering fluid for the flushing process.
- – Check power steering fluid levels periodically and add fluid when necessary.
- – Flushing the system will help eliminate any residual contaminants from causing future pump failure. Dirty or contaminated fluid may cause low or no pressure from the power steering pump, causing the relief valve to stop functioning.
- – Have your vehicle inspected if it exhibits any of the following symptoms: unusual noise when turning the steering wheel, a shimmy or shake in the steering wheel, heavy or unresponsive steering at low speeds or during parking lot maneuvers, and/or the steering wheel does not properly return to center.
- – If you live in areas that experience harsh, winter weather, have the entire steering system inspected before winter arrives to help ensure safer driving.
- – It is a good idea to replace O-rings when doing any steering system service. Reusing old O-rings can cause leaks.
- – Keep in mind that fluid color is not an indication of fluid condition.
- – The most significant root causes of power steering failures that could lead to pump replacement are system contamination, improper pulley installation, and using the wrong fluid. Following the recommended service procedures during power steering pump replacement address these root causes and help ensure the longevity of the new power steering pump while reducing the chances of premature pump failure.
Specifications:
Seal Colors:
Black, Brown
Manufacturer Warranty:
24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
