Description:
Get the ACDelco 32103 Engine Coolant Thermostat Housing Gasket for your vehicle. Buy now and secure your purchase online!
ACDelco Professional, premium aftermarket Return Fuel Line/PVC/Evaporative Emission Control Hoses (1986 & Older) are multi-purpose hoses used on Return Fuel Lines, PCV, and EEC systems, and for fuel return hose connections on diesel fuel injection systems. They are approved for use with leaded and unleaded gasoline, diesel, and gasoline blends of ethanol (E85), methanol, and ethers (up to the legal limits allowed by the EPA). They are temperature rated from -40 degrees Fahrenheit to 257 degrees Fahrenheit (-40 degrees Celsius to 125 degrees Celsius) with gasoline blends. These premium aftermarket replacement hoses are manufactured to meet your expectations for fit, form, and function. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Intended for use with fuels where MTBE concentrations are no greater than 15% by volume
- NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments
- Nitrile tube that is spiral reinforced for enhanced durability
- Vacuum rating of 24 in/Hg for sizes less than 12 in I.D., and 10 in/Hg for sizes 12 in to 3/4 in I.D. at ambient temperatures
- Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications
Specifications:
Measurements:
5/16 in x 25ft (50 psi, 24 in/hg)
Universal Or Specific Fit:
Universal
Working Pressure:
50 lb per Square in.
Features and Benefits:
- – Examine hoses every 12 months. Look for leaks, cracks, or rot. Replace when showing signs of wear.
- – Have cooling system inspected immediately if instrument panel-mounted temperature gauge indicates engine overheating.
- – Periodically remove bugs, leaves, and other debris from the front of the radiator. They can block airflow and substantially reduce cooling efficiency.
- – Though electrochemical degradation occurs from the inside out, you can feel for voids, cracks, or weak spots. Squeeze the hose with your thumb and two or three fingers. If you're not sure, remove the hose and check it visually.
- – Tighten any loose clamps. Replace clamps when replacing hoses.
Specifications:
