ACDelco 2T17590 Accessory Drive Belt

Description:

Features and Benefits:

• Has a unique tensile cord design that gives it extra strength, added flexibility, and shock load resistance
• It cannot turn over or slip off of the drive which ensures precise performance
• Made with molded notches that reduce bending stress, especially on small diameter pulleys, and also help dissipate heat
• Provides even load distribution between strands for better shock load absorption

Specifications:

Features and Benefits:

• – Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles.
• – Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration.
• – Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure.
• – Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles.
• – Use an approved tension gauge to check belt tension.

Specifications: