Description:
An ACDelco GM Original Equipment Radiator Surge Tank helps regulate the cooling system fluid level and provide a place for coolant expansions or contractions, and are GM-recommended replacements for your vehicle's original components. This original equipment radiator surge tank has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- GM-recommended replacement part for your GM vehicle's original factory component
- Manufactured to GM OE specification for fit, form, and function
- Offering the quality, reliability, and durability of GM OE
Specifications:
Centerline Length:
764 mm
End 1 Inside Diameter:
1.77 in.
End 1 Inside Diameter:
45.0 mm
End 2 Inside Diameter:
2.13 in.
End 2 Inside Diameter:
54.0 mm
End 3 Inside Diameter:
20 mm
Hose Shape:
Molded Assembly
Material:
Reinforced Rubber
Measurements:
Branched - 1 25/32 in x 2 1/8 in x 25/32 in x 30 3/32
Protective Sleeve Attached:
No
Features and Benefits:
- – Check all coolant systems connections and hoses at required intervals.
- – Steam and scalding liquids from a hot cooling system can blow out and burn you badly. Never turn the cap when the cooling system, including the surge tank pressure cap, is hot. Wait for the cooling system and surge tank pressure cap to cool.
- – The vehicle must be on a level surface when checking the coolant level.
- – Use approved type of coolant for your vehicle. Refer to owner's manual for more information.
- – When the engine is cold, the coolant level should be at the COLD FILL line on the coolant recovery tank. Be sure the cooling system is cool before adding coolant.
- – You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine.
Specifications:
