Description:
PAD KIT FRT DIS (SLP-1)
ACDelco GM Original Equipment Disc Brake Pads are the friction material used in disc brakes that press against the brake rotor to stop the vehicle. This friction-enhancing material is bonded and/or riveted to steel backing plates. These original equipment disc brake pads are manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- GM-recommended replacement part for your GM vehicle's original factory component
- Integrally molded - friction material molded to backing plate for bond integrity
- Manufactured to GM OE specification for fit, form, and function
- Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Specifications:
Friction Material Attachment:
Bonded
Inner Pad Friction Material Thickness:
0.41 in.
Inner Pad Friction Material Thickness:
10.56 mm
Mounting Hardware Included:
Yes
Outer Pad Friction Material Thickness:
0.41 in.
Outer Pad Friction Material Thickness:
10.56 mm
Pad Wear Sensor Included:
Yes
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems.
- The following should be conducted by a qualified technician:
Specifications:
