Description:
ACDelco GM Original Equipment Remanufactured Steering Gears convert steering wheel rotation into the side-to-side motion needed to steer your vehicle's front wheels, and are GM-recommended replacements for your vehicle's original components. Remanufacturing steering gears is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing helps return components back into service rather than processing as scrap or simply disposing of them. These steering gears will provide the same performance, durability, and service life you expect from ACDelco. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Converts steering wheel rotation into side-to-side motion needed to steer front wheels
Specifications:
Input Shaft Diameter:
0.660 in.
Input Shaft Diameter:
16.76 mm
Output Shaft Diameter:
1.250 in.
Output Shaft Diameter:
31.75 mm
Output Shaft Spline Quantity:
32
Port 1 Thread Diameter (in):
0.709 in
Port 1 Thread Diameter (mm):
18.00 mm
Port 2 Thread Diameter (in):
0.630 in
Port 2 Thread Diameter (mm):
16.00 mm
Total Turns Lock To Lock:
3
Features and Benefits:
- – A shimmy or shake in the steering wheel
- – Check your power steering fluid levels and belts and hoses.
- – Especially have the inner and outer tie rods inspected for grease leaks and excessive lash or 'play'
- – Heavy or unresponsive steering at low speeds or during parking lot maneuvers
- – Service power steering system light illuminating in the driver information center
- – Steering wheel not returning to 'center' properly
- – Unusual noise when turning the steering wheel
- – Wet spots/fluid stains on the ground beneath the vehicle.
- For hydraulic power steering systems:
- Have your vehicle inspected if it exhibits any of the following symptoms:
- If you live in areas that experience harsh winter weather, have the entire steering system inspected before winter arrives.
Specifications:
