Description:
BRK. CYLINDER (B)
ACDelco Professional Brake Master Cylinders use both aluminum and iron castings, making them a high quality replacement for many vehicles on the road today. These master cylinders contain both Ethylene Propylene (EPDM) and Styrene Butadiene (SBR) rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Professional Brake Master Cylinders are ready to bench bleed and install right out of the box - no assembly required. These premium aftermarket replacement brake master cylinders are manufactured to meet your expectations for fit, form, and function. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
- Geometrical tolerance ensures that the body and plastic reservoir match for a proper fit
- Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
- Piston assembly and return spring help to prevent brake drag, which can cause premature brake pad wear
- Pressure tested to ensure safe and confident braking
Specifications:
Bleeder Hoses Included:
Yes
Brake Booster Included:
No
Master Cylinder Bore Diameter:
1 in.
Master Cylinder Bore Diameter:
25.4 mm
Master Cylinder Cap Included:
Yes
Master Cylinder Material:
Aluminum
Mounting Bracket Included:
No
Mounting Hole Diameter:
0.433 in.
Mounting Hole Quantity:
2
Primary Outlet Thread Diameter:
0.393 in.
Primary Outlet Thread Diameter:
10 mm
Secondary Outlet Thread Diameter:
0.393 in.
Secondary Outlet Thread Diameter:
10 mm
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems:
- The following should be conducted by a qualified technician:
Specifications:
