Description:
BRK HOSE (B)
ACDelco Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each brake hose contains double-crimped fittings to provide longer service life and durability. The ACDelco Professional Brake Hydraulic Hose is a high quality replacement component for your vehicle's braking system. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
- Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
- Premium brass fittings provide an excellent hydraulic seal
Specifications:
Axis 1 Length:
22.375 in.
Axis 1 Length:
568.325 mm
Bracket Material:
Corrosion Resistant Steel
End 1 Fitting Material:
Corrosion Resistant Steel
End 1 Fitting Type:
5/8-18 (7/16-24)
End 1 Thread Diameter (in):
0.375 in
End 1 Thread Diameter (mm):
9.525 mm
End 2 Fitting Material:
Corrosion Resistant Steel
End 2 Fitting Type:
3/8-24
Gasket Or Seal Included:
No
Jacket Material:
EPDM Rubber
Mounting Hardware Included:
Yes
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems:
- The following should be conducted by a qualified technician:
Specifications:
