Description:
DRUM R (GSMP)
ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box. WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
- Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
- Inspected for balance; resulting in smooth brake operation and noise reduction
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – The following inspections and maintenance procedures can help prevent potential brake problems:
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- – The following should be conducted by a qualified technician:
Specifications:
ABS Sensor Ring Included:
No
Bolt Circle Diameter:
4.5 in.
Brake Surface Finish:
Turned
Discard Thickness:
9.89 in.
Keyword Search:
ACDelco; ACDelco Brake Drums; ACDelco Professional Brake Drums; ACDelco Professional Brake Drums; Brakes; Braking; Brake Drums; Brake Parts; Brakes; Brake Drums; DRUM,FRT BRK; DRUM,RR BRK; DRUM,RR BRK(W/HUB); Professional Brakes; Professional Brake Drums; Professional Brake Drums
Mount Hole Diameter:
0.593 in.
New Or Remanufactured:
New
Nominal Drum Diameter:
9.9 in.
Outside Diameter:
12.1 in.
Manufacturer Warranty:
24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
