Brands Vehicles
Lowest Prices
Free Returns
Online Since 2009
Shopping for

1968 Ford Thunderbird

X

ACDelco 18B478 Brake Drum
for 1968 Ford Thunderbird

ACDelco 18B478 Brake Drum - 1968 Ford Thunderbird Image 1
ACDelco 18B478 Brake Drum - 1968 Ford Thunderbird Image 2
ACDelco 18B478 Brake Drum - 1968 Ford Thunderbird

ACDelco
Brand:ACDelco
Part Number: 18B478
UPC: 00707773354650
Weight: 16.7 lbs
Condition:New



On Sale:

$46.39

Availability:
5 in Stock
Warehouse: US-12
Quantity:

Product Information

Description:

DRUM F (B)

ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

Features and Benefits:

  • Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
  • Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
  • Inspected for balance; resulting in smooth brake operation and noise reduction

Specifications:

ABS Tone Ring Included:
No
Bolt Circle Diameter (in):
4.5 in
Bolt Circle Diameter (mm):
114.3 mm
Bolt Hole Quantity:
5
Brake Surface Finish:
Turned
Center Bore Diameter (in):
2.43in
Center Bore Diameter (mm):
61.7mm
Depth:
2.89 in.
Depth:
73.4 mm
Discard Thickness (in):
11.09 in
Discard Thickness (mm):
281.7 mm
Grade Type:
Regular
Height (in):
4.75 in
Length (in):
11.09 in
Material:
Cast Iron
Maximum Brake Diameter (Discard):
281.69 mm
Mount Hole Diameter (in):
0.621in
Mount Hole Diameter (mm):
15.773mm
Nominal Drum Diameter:
0.437 in.
Nominal Drum Diameter:
11.1 mm
Outer Cooling Fins:
No
Outside Diameter:
0.504 in.
Outside Diameter:
12.8 mm
Programming Required:
No
Stud/Lug Hole Diameter:
0.613 in.
Stud/Lug Hole Diameter:
15.55 mm
Stud/Lug Hole Quantity:
5
Weight:
16.7 lb
Width (in):
13.25 in

Features and Benefits:

  • – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
  • – Check the thickness of your brake pads.
  • – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • – Inspection of the brake hoses for brittleness or cracking.
  • – Inspection of wheel bearings and grease seals.
  • – Parking brake adjustments (as needed).
  • The following inspections and maintenance procedures can help prevent potential brake problems:
  • The following should be conducted by a qualified technician:

Specifications:

Country of Origin:
CN

ACDelco 18B478 Brake Drum compatibility with your 1968 Ford Thunderbird...

Last Updated: 03/03/2024

Years Vehicle Per Vehicle Position Fit NotesFitment Notes

1968

 

1967

 

1968

 

1967

 
Ford Thunderbird

6.4L V8 Gas OHV,
7.0L V8 Gas OHV
2
 
Rear
 
Professional
 

Ford Thunderbird



6.4L V8 Gas OHV,
7.0L V8 Gas OHV

Rear Professional

2 Per Vehicle

Didn't find a match for your vehicle?

  See Other Choices