Brands Vehicles
Lowest Prices
Free Returns
Online Since 2009
Shopping for

2019 Toyota Mirai

X

ACDelco 18B415 Brake Drum

ACDelco 18B415 Brake Drum Image 1
ACDelco 18B415 Brake Drum Image 2
ACDelco 18B415 Brake Drum Image 3
ACDelco 18B415 Brake Drum

ACDelco
Brand:ACDelco
Part Number: 18B415
UPC: 00707773647868
Weight: 50 lbs
Condition:New



On Sale:

$146.45

Availability:
14 in Stock
Warehouse: US-4
Part Does Not Fit!
See Details Below

Part Does Not Fit! Part Does Not Fit! Part Does Not Fit!

!!! WARNING: This product DOES NOT FIT your 2019 Toyota Mirai

  Find One That Does!     I Know, Clear Vehicle
Part Does Not Fit! Part Does Not Fit! Part Does Not Fit!

Product Information

Description:

Get the ACDelco 18B415 Brake Drum for your vehicle. Buy now and secure your purchase online!

ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

Features and Benefits:

  • Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
  • Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
  • Inspected for balance; resulting in smooth brake operation and noise reduction

Specifications:

ABS Tone Ring Included:
No
Bolt Circle Diameter (in):
8.75 in
Bolt Circle Diameter (mm):
222.25 mm
Bolt Hole Quantity:
6
Bolt Thread Pitch (in):
0.886 in
Bolt Thread Pitch:
22.5 mm
Center Bore Diameter (in):
6.8in
Center Bore Diameter (mm):
172.7mm
Depth:
116.3 mm
Depth:
4.579 in.
Height (in):
8.9 in
Length (in):
12.66 in
Material:
Cast Iron
Maximum Brake Diameter (Discard):
321.56 mm
Mount Hole Diameter (in):
0.906in
Mount Hole Diameter (mm):
23.012mm
Nominal Drum Diameter:
12.598 in.
Nominal Drum Diameter:
320 mm
Outer Cooling Fins:
No
Outside Diameter:
14.799 in.
Outside Diameter:
375.9 mm
Overall Height:
190.8 mm
Overall Height:
7.512 in.
Programming Required:
No
Stud/Lug Hole Diameter:
0.886 in.
Stud/Lug Hole Diameter:
22.5 mm
Stud/Lug Hole Quantity:
6
Weight:
50 lb
Width (in):
17.4 in

Features and Benefits:

  • – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
  • – Check the thickness of your brake pads.
  • – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • – Inspection of the brake hoses for brittleness or cracking.
  • – Inspection of wheel bearings and grease seals.
  • – Parking brake adjustments (as needed).
  • The following inspections and maintenance procedures can help prevent potential brake problems:
  • The following should be conducted by a qualified technician:

Specifications:

Country of Origin:
US