Brands Vehicles
Lowest Prices
Free Returns
Online Since 2009
Shopping for

1975 Dodge Royal Monaco

X

ACDelco 18B38 Brake Drum
for 1975 Dodge Royal Monaco

ACDelco 18B38 Brake Drum - 1975 Dodge Royal Monaco Image 1
ACDelco 18B38 Brake Drum - 1975 Dodge Royal Monaco Image 2
ACDelco 18B38 Brake Drum - 1975 Dodge Royal Monaco Image 3
ACDelco 18B38 Brake Drum - 1975 Dodge Royal Monaco

ACDelco
Brand:ACDelco
Part Number: 18B38
UPC: 00707773403426
Weight: 18.8 lbs
Condition:New



Availability:
0 in Stock
 OUT OF STOCK

Product Information

Description:

BRK DRUM (B)

ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

Features and Benefits:

  • Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
  • Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
  • Inspected for balance; resulting in smooth brake operation and noise reduction

Specifications:

ABS Tone Ring Included:
No
Bolt Circle Diameter (in):
4.5 in
Bolt Circle Diameter (mm):
114.3 mm
Bolt Hole Quantity:
5
Brake Surface Finish:
Turned
Center Bore Diameter (in):
2.83in
Center Bore Diameter (mm):
72mm
Depth:
3.32 in.
Depth:
84.35 mm
Discard Thickness (in):
11.06 in
Discard Thickness (mm):
280.9 mm
Grade Type:
Regular
Height (in):
4.4 in
Length (in):
11.06 in
Material:
Cast Iron
Maximum Brake Diameter (Discard):
280.92 mm
Measurements:
11 X 2 in
Mount Hole Diameter (in):
0.662in
Mount Hole Diameter (mm):
16.815mm
Nominal Drum Diameter:
0.435 in.
Nominal Drum Diameter:
11.05 mm
Outer Cooling Fins:
Yes
Outside Diameter:
0.536 in.
Outside Diameter:
13.6 mm
Programming Required:
No
Stud/Lug Hole Diameter:
0.654 in.
Stud/Lug Hole Diameter:
16.6 mm
Stud/Lug Hole Quantity:
5
Weight:
18.8 lb
Width (in):
14.1 in

Features and Benefits:

  • – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
  • – Check the thickness of your brake pads.
  • – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • – Inspection of the brake hoses for brittleness or cracking.
  • – Inspection of wheel bearings and grease seals.
  • – Parking brake adjustments (as needed).
  • The following inspections and maintenance procedures can help prevent potential brake problems:
  • The following should be conducted by a qualified technician:

Specifications:

Country of Origin:
CN

ACDelco 18B38 Brake Drum compatibility with your 1975 Dodge Royal Monaco...

Last Updated: 03/03/2024

Years Vehicle Per Vehicle Position Fit NotesFitment Notes

1977

 

1976

 

1975

 

1977

 

1976

 

1975

 
Dodge Royal Monaco

5.9L V8 Gas OHV,
6.6L V8 Gas OHV,
7.2L V8 Gas OHV
2
 
Rear
 
Professional
with 11 IN x 2 IN Brakes
 

Dodge Royal Monaco



5.9L V8 Gas OHV,
6.6L V8 Gas OHV,
7.2L V8 Gas OHV

Rear Professional
with 11 IN x 2 IN Brakes

2 Per Vehicle

1975

 

1975

 
Dodge Royal Monaco

5.2L V8 Gas OHV
2
 
Rear
 
Professional
with 11 IN x 2 IN Brakes
 

Dodge Royal Monaco



5.2L V8 Gas OHV

Rear Professional
with 11 IN x 2 IN Brakes

2 Per Vehicle

Didn't find a match for your vehicle?

  See Other Choices