Brands Vehicles
Lowest Prices
Free Returns
Online Since 2009
Shopping for

1986 Plymouth Gran Fury

X

ACDelco 18B32 Brake Drum
for 1986 Plymouth Gran Fury 5.2L V8 Gas OHV

ACDelco 18B32 Brake Drum - 1986 Plymouth Gran Fury Image 1
ACDelco 18B32 Brake Drum - 1986 Plymouth Gran Fury Image 2
ACDelco 18B32 Brake Drum - 1986 Plymouth Gran Fury Image 3
ACDelco 18B32 Brake Drum - 1986 Plymouth Gran Fury Image 4
ACDelco 18B32 Brake Drum - 1986 Plymouth Gran Fury

ACDelco
Brand:ACDelco
Part Number: 18B32
UPC: 00036666682847
Weight: 19.05 lbs
Condition:New



Availability:
0 in Stock
 OUT OF STOCK

Product Information

Description:

BRK DRUM (B)

ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

Features and Benefits:

  • Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
  • Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
  • Inspected for balance; resulting in smooth brake operation and noise reduction

Specifications:

ABS Tone Ring Included:
No
Bolt Circle Diameter (in):
4.5 in
Bolt Circle Diameter (mm):
114.3 mm
Bolt Hole Quantity:
5
Brake Surface Finish:
Turned
Center Bore Diameter (in):
2.83in
Center Bore Diameter (mm):
72mm
Depth:
3.51 in.
Depth:
89.15 mm
Discard Thickness (in):
10.06 in
Discard Thickness (mm):
255.5 mm
Grade Type:
Regular
Height (in):
4.8 in
Length (in):
10.06 in
Material:
Cast Iron
Maximum Brake Diameter (Discard):
255.52 mm
Measurements:
10 in
Mount Hole Diameter (in):
0.662in
Mount Hole Diameter (mm):
16.815mm
Nominal Drum Diameter:
0.396 in.
Nominal Drum Diameter:
10.05 mm
Outer Cooling Fins:
Yes
Outside Diameter:
0.496 in.
Outside Diameter:
12.6 mm
Programming Required:
No
Stud/Lug Hole Diameter:
0.654 in.
Stud/Lug Hole Diameter:
16.6 mm
Stud/Lug Hole Quantity:
5
Weight:
19.05 lb
Width (in):
13.1 in

Features and Benefits:

  • – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
  • – Check the thickness of your brake pads.
  • – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • – Inspection of the brake hoses for brittleness or cracking.
  • – Inspection of wheel bearings and grease seals.
  • – Parking brake adjustments (as needed).
  • The following inspections and maintenance procedures can help prevent potential brake problems:
  • The following should be conducted by a qualified technician:

Specifications:

Country of Origin:
US

ACDelco 18B32 Brake Drum compatibility with your 1986 Plymouth Gran Fury...

Last Updated: 03/03/2024

Years Vehicle Per Vehicle Position Fit NotesFitment Notes

1989

 

1988

 

1987

 

1986

 

1985

 

1984

 

1983

 

1982

 

1981

 

1980

 

1989

 

1988

 

1987

 

1986

 

1985

 

1984

 

1983

 

1982

 

1981

 

1980

 
Plymouth Gran Fury

5.2L V8 Gas OHV
2
 
Rear
 
Professional
with 10 IN Brakes
 

Plymouth Gran Fury



5.2L V8 Gas OHV

Rear Professional
with 10 IN Brakes

2 Per Vehicle

Didn't find a match for your vehicle?

  See Other Choices