Brands Vehicles
Lowest Prices
Free Returns
Online Since 2009
Shopping for

1990 Plymouth Grand Voyager

X

ACDelco 18B122 Brake Drum
for 1990 Plymouth Grand Voyager 3.3L V6 Gas OHV

ACDelco 18B122 Brake Drum - 1990 Plymouth Grand Voyager Image 1
ACDelco 18B122 Brake Drum - 1990 Plymouth Grand Voyager Image 2
ACDelco 18B122 Brake Drum - 1990 Plymouth Grand Voyager Image 3
ACDelco 18B122 Brake Drum - 1990 Plymouth Grand Voyager Image 4
ACDelco 18B122 Brake Drum - 1990 Plymouth Grand Voyager

ACDelco
Brand:ACDelco
Part Number: 18B122
UPC: 00707773352052
Weight: 15.5 lbs
Condition:New



Availability:
0 in Stock
 OUT OF STOCK

Product Information

Description:

Get the ACDelco 18B122 Brake Drum for your 1990 Plymouth Grand Voyager. Buy now and secure your purchase online!

ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

Features and Benefits:

  • Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
  • Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
  • Inspected for balance; resulting in smooth brake operation and noise reduction

Specifications:

ABS Tone Ring Included:
No
Bolt Circle Diameter (in):
3.937 in
Bolt Circle Diameter (mm):
99.99 mm
Bolt Hole Quantity:
5
Brake Surface Finish:
Non-Directional
Depth:
3.6 in.
Depth:
91.45 mm
Drum Center Bore Diameter (in):
2.265 in
Drum Center Bore Diameter (mm):
57.53 mm
Inside Diameter:
228.6 mm
Inside Diameter:
9 in.
Material:
Cast Iron
Maximum Brake Diameter (Discard):
230.88 mm
Maximum Brake Diameter (Discard):
9.09 in.
Mount Hole Diameter (in):
0.566in
Mount Hole Diameter (mm):
14.37mm
Nominal Drum Diameter:
0.358 in.
Nominal Drum Diameter:
9.1 mm
Outer Cooling Fins:
Yes
Outside Diameter:
0.433 in.
Outside Diameter:
11 mm
Programming Required:
No
Stud/Lug Hole Diameter:
0.558 in.
Stud/Lug Hole Diameter:
14.15 mm
Stud/Lug Hole Quantity:
5

Features and Benefits:

  • – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
  • – Check the thickness of your brake pads.
  • – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • – Inspection of the brake hoses for brittleness or cracking.
  • – Inspection of wheel bearings and grease seals.
  • – Parking brake adjustments (as needed).
  • The following inspections and maintenance procedures can help prevent potential brake problems:
  • The following should be conducted by a qualified technician:

ACDelco 18B122 Brake Drum compatibility with your 1990 Plymouth Grand Voyager...

Last Updated: 03/03/2024

Years Vehicle Per Vehicle Position Fit NotesFitment Notes

1990

 

1990

 
Plymouth Grand Voyager

3.3L V6 Gas OHV
2
 
Rear
 
Professional
with 14 IN Wheels
with 9 IN x 2-1/2 IN Brakes
Non-ABS
 

Plymouth Grand Voyager



3.3L V6 Gas OHV

Rear Professional
with 14 IN Wheels
with 9 IN x 2-1/2 IN Brakes
Non-ABS

2 Per Vehicle

Didn't find a match for your vehicle?

  See Other Choices