Description:
BRAKE ROTOR (B)
ACDelco Gold (Professional) Non-Coated Disc Brake Rotors are a high quality alternative to Original Equipment (OE) parts. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Premium aftermarket replacement part
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Specifications:
ABS Tone Ring Included:
No
Bolt Circle Diameter (in):
4.3 in
Bolt Circle Diameter (mm):
108 mm
Center Bore Diameter (in):
2.5in
Center Bore Diameter (mm):
64.5mm
Center Hole Diameter:
2.54 in.
Center Hole Diameter:
64.5 mm
Conventional Or Drum-In-Hat Type Rotor:
Conventional
Disc Brake Rotor Construction:
Vented
Discard Thickness:
0.935 in.
Discard Thickness:
23.75 mm
Includes ABS Sensor Ring:
No
Max Bolt Hole Diameter (mm):
64.52mm
Mounting Bolt Hole Circle Diameter:
107.95 mm
Mounting Bolt Hole Circle Diameter:
4.25 in.
Mounting Bolt Hole Diameter:
0.552 in.
Mounting Bolt Hole Diameter:
14 mm
Mounting Bolt Hole Quantity:
5
Nominal Thickness:
1.025 in.
Nominal Thickness:
26.05 mm
Outside Diameter:
10.865 in.
Outside Diameter:
275.95 mm
Overall Height:
2.005 in.
Overall Rotor Diameter (mm):
275.84mm
Pad Contact Surface Width:
2 in.
Pad Contact Surface Width:
50.35 mm
Pitch Circle Diameter (mm):
107.95mm
Rust Resistant Coating:
No
Solid Or Vented Type Rotor:
Solid
Stud/Lug Hole Quantity:
5
Thickness (mm):
26.035 mm
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems:
- The following should be conducted by a qualified technician:
Specifications:
