Description:
Get the ACDelco 18A1629 Disc Brake Rotor and Hub Assembly for your vehicle. Buy now and secure your purchase online!
ACDelco Gold (Professional) Black Hat Disc Brake Rotor and Hub Assemblies are a high quality alternative to Original Equipment (OE) parts. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Premium aftermarket replacement part
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Specifications:
ABS Tone Ring Included:
Yes
Bolt Circle Diameter (in):
6.69 in
Bolt Circle Diameter (mm):
170 mm
Discard Thickness:
1.417 in.
Mounting Bolt Hole Circle Diameter:
170 mm
Mounting Bolt Hole Circle Diameter:
6.693 in.
Mounting Bolt Hole Diameter:
0.603 in.
Mounting Bolt Hole Diameter:
15.3 mm
Mounting Bolt Hole Quantity:
8
Nominal Thickness:
1.496 in.
Outside Diameter (in):
13.03 in
Outside Diameter (mm):
330.9 mm
Rotor Outside Diameter:
13.03 in.
Rotor Outside Diameter:
330.9 mm
Solid Or Vented Type Rotor:
Vented
Stud/Lug Hole Quantity:
8
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems:
- The following should be conducted by a qualified technician:
Specifications:
