Description:
ACDelco Gold (Professional) Semi-Metallic Disc Brake Pads are a high quality alternative to Original Equipment (OE) parts. These brake pads are formulated with steel strands to provide strength and conduct heat away from the rotor's surface while offering premium braking power. They are a high quality replacement for many vehicles on the road today. Noise-dampening shims are included where applicable. Also, no curing is required. Independently tested using SAE J2784 standards. ACDelco Gold (Professional) Semi-Metallic Brake Pads are ready to be installed right out of the box. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Ceramic, semi-metallic, and organic formulas provide safety and reliability for a range of vehicle applications
- Integrally molded - friction material molded to backing plate for bond integrity
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Premium aftermarket replacement part
- Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Stamped backing plate allows for proper pad movement within the caliper assembly, reducing noise, brake pulsation, and helps to protect against premature wear
- Tested to SAE J2784 for braking effectiveness, along with Noise/Vibration/Harshness (NVH) and durability/wear testing for assurance of quality
Specifications:
Friction Material Attachment:
Bonded
Friction Material Composition:
Metallic
Inner Pad Friction Material Thickness:
0.63 in.
Inner Pad Friction Material Thickness:
15.9 mm
Inner Pad Height:
2.650 in.
Inner Pad Overall Thickness:
0.630 in.
Inner Pad Width:
5.500 in.
Mounting Hardware Included:
Yes
Outer Pad Friction Material Thickness:
0.63 in.
Outer Pad Friction Material Thickness:
15.9 mm
Outer Pad Height:
2.650 in.
Outer Pad Overall Thickness:
0.630 in.
Outer Pad Width:
5.500 in.
Pad Wear Sensor Included:
Yes
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems:
- The following should be conducted by a qualified technician:
Specifications:
