Description:
PAD ALSO CERM (GSMP-1)
ACDelco Gold (Professional) Ceramic Disc Brake Pad Sets are the high quality alternative to Original Equipment (OE) parts. A set includes 4 brake pads in which 2 pads are installed within each caliper. The brake pads apply pressure to the rotor on each of the vehicle's wheels, creating the friction needed to slow or stop the vehicle. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Integrally molded to backing plate for bond integrity
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Premium aftermarket replacement part
- Premium shims, slots, and chamfers can help to dimish noise, vibration, and braking harshness
- Select Gold hardware includes nitrile coated material to help reduce noise
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Stamped backing plate allows for proper pad movement within the caliper assembly, help reduce noise, brake pulsation, and helps to protect against premature wear
- Tested to SAE J2784 for braking effectiveness, along with Noise/Vibration/Harshness (NVH) and durability/wear testing
Specifications:
Friction Material Attachment:
Integrally Molded
Friction Material Composition:
Ceramic
Inner Pad Friction Material Thickness:
0.75 in.
Inner Pad Friction Material Thickness:
19.1 mm
Inner Pad Height:
2.290 in.
Inner Pad Overall Thickness:
0.240 in.
Inner Pad Width:
5.780 in.
Mounting Hardware Included:
Yes
Outer Pad Friction Material Thickness:
0.75 in.
Outer Pad Friction Material Thickness:
19.1 mm
Outer Pad Height:
2.290 in.
Outer Pad Width:
5.780 in.
Pad Wear Sensor Included:
No
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems:
- The following should be conducted by a qualified technician:
Specifications:
