Description:
ACDelco Gold (Professional) Semi-Metallic Disc Brake Pads are a high quality alternative to Original Equipment (OE) parts. These brake pads are formulated with steel strands to provide strength and conduct heat away from the rotor's surface while offering premium braking power. They are a high quality replacement for many vehicles on the road today. Noise-dampening shims are included where applicable. Also, no curing is required. Independently tested using SAE J2784 standards. ACDelco Gold (Professional) Semi-Metallic Brake Pads are ready to be installed right out of the box. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Abutment clips and shims where applicable feature a rubberized coating for quiet operation
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Mechanical Retention System backing plates used when possible for shear strength and are galvanized to resist corrosion
- Premium aftermarket replacement part
- Premium chamfers and slots match up with GM original equipment
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Tested to AMP3 standards for braking effectiveness, along with Noise/Vibration/Harshness (NVH) and durability/wear testing
Specifications:
Friction Material Attachment:
Bonded
Friction Material Composition:
Metallic
Inner Pad Height:
3.150 in.
Inner Pad Overall Thickness:
0.855 in.
Inner Pad Width:
8.070 in.
Mounting Hardware Included:
Yes
Outer Pad Height:
3.810 in.
Outer Pad Overall Thickness:
0.645 in.
Outer Pad Width:
10.440 in.
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems:
- The following should be conducted by a qualified technician:
Specifications:
