Description:
ACDelco Professional, premium aftermarket V-Belts serve as replacement belts for today's most demanding engine drives. Due to thermal forces, these variable notched belts actually tighten on the drive as they get hot. This results in improved belt performance by reducing tension, decay, and noise. These premium aftermarket replacement v-belts are manufactured to meet your expectations for fit, form, and function. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Has thermally active tensile cords that provide maintenance free performance when properly installed and tensioned
- Its fiber loaded rubber stock puts more flexibility along the length of the belt, yet gives the belt greater lateral stability in the pulley
- Manufactured with form ground to ensure precise top width and sidewall dimensional control for proper fit in the pulley as well as a smoother, quieter running belt
Specifications:
Effective Length:
1346 mm
Material:
Fiber Loaded Rubber
Measurements:
50 1/2 in x 53 3/8
Outside Circumference:
1356 mm
Features and Benefits:
- – Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles.
- – Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration.
- – Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure.
- – Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles.
- – Replace serpentine belts every 60,000 - 100,000 miles. Check vehicle's owner's manual.
- – Use an approved tension gauge to check belt tension.
Specifications:
