Description:
ACDelco GM Original Equipment Disc Brake Pad Sets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sets consist of 2 pads that press against the brake rotor when the brakes are applied. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- Brake pad retractors to help with parasitic drag optimizing fuel economy (availability depends on vehicle application)
- Electronic pad wear sensor. Brake pad life is re-evaluated each time the brake pedal is applied (availablilty depends on vehicle application)
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM Original Equipment Brake Pad Sets are designed and validated to work with all chassis systems such as ABS, StabiliTrak(TM), and Forward Collision alert systems if equipped
- GM Original Equipment Brake Pad Sets are the same or an improved upon version of the parts your GM vehicle was originally manufactured with
- GM regularly updates production and service part designs to integrate new materials and technologies
- High performance and race track capable pads use low metallic brake pad formulas
- High performance applications may include mechanical retention clips that help the pad to adhere to the backing plate (Availability depends on vehicle application)
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- Some GM vehicles use non-asbestos organic or ceramic brake pads
- Zinc-nickel backing plate. Use of Zinc-Nickel plating prevents binding of the pads within a simulated 10 year corrosion cycle. (Availability depends on vehicle application)
Specifications:
Abutment Clips Included:
Yes
Friction Material Attachment:
Bonded
Inner Pad Friction Material Thickness:
0.393 in.
Inner Pad Friction Material Thickness:
9.98 mm
Mounting Hardware Included:
Yes
Original Equipment Replacement:
Yes
Outer Pad Friction Material Thickness:
0.393 in.
Outer Pad Friction Material Thickness:
9.98 mm
Pad Wear Sensor Included:
Yes
Pad Wear Sensor Type:
Mechanical
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems.
- The following should be conducted by a qualified technician:
Specifications:
