Description:
GM Genuine Parts Brake Backing are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Within the braking system the wheel cylinder is mounted to these brake plates and they serve as the foundation for the brake shoes and other drum brake components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM regularly updates production and service part designs to integrate new materials and technologies
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Specifications:
Inside Diameter:
3.818 in.
Maximum Diameter:
14.34 in.
Maximum Diameter:
364.4 mm
Mount Hole Diameter (in):
0.505in
Mount Hole Diameter (mm):
12.83mm
Shoe Anchor Stud Attached:
No
Wheel Cylinder Mount Hole Diameter:
1.516 in.
Wheel Cylinder Mount Hole Diameter:
38.52 mm
Wheel Cylinder Mount Hole Quantity:
1
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems.
- The following should be conducted by a qualified technician:
Specifications:
