Description:
ACDelco Silver (Advantage) Ceramic Disc Brake Pads are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These brake pads have a ceramic formulation that uses less metal, providing quality braking power in a quiet and low-dusting package. Also, hardware clip kits are included where applicable. ACDelco Silver (Advantage) Ceramic Disc Brake Pads are available for all makes and models. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
- Ceramic, Semi-Metallic, and Organic formulas provide safety and reliability for a range of vehicle applications
- Economical value with dependable quality
- For General Motors vehicles as well as most makes and models
- No curing or machining required, ready to be installed right out of the box
- Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
Specifications:
Friction Material Composition:
Ceramic
Inner Pad Friction Material Thickness:
0.62 in.
Inner Pad Friction Material Thickness:
15.7 mm
Inner Pad Height:
2.300 in.
Inner Pad Overall Thickness:
0.240 in.
Inner Pad Width:
5.900 in.
Mounting Hardware Included:
Yes
Outer Pad Friction Material Thickness:
0.62 in.
Outer Pad Friction Material Thickness:
15.7 mm
Outer Pad Height:
2.300 in.
Outer Pad Overall Thickness:
0.240 in.
Outer Pad Width:
5.900 in.
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- – The following inspections and maintenance procedures can help prevent potential brake problems:
- – The following should be conducted by a qualified technician:
Specifications:
Manufacturer Warranty:
12 Months
