Description:
ACDelco Silver (Advantage) Semi-Metallic Disc Brake Pads are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These disc brake pads are formulated with steel strands to provide strength and conduct heat away from the rotor's surface while offering quality braking power. Also, hardware clip kits are included where applicable. ACDelco Advantage Semi-Metallic Disc Brake Pads are available for all makes and models. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
- Ceramic, Semi-Metallic, and Organic formulas provide safety and reliability for a range of vehicle applications
- Economical value with dependable quality
- For General Motors vehicles as well as most makes and models
- No curing or machining required, ready to be installed right out of the box
- Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
Specifications:
Friction Material Attachment:
Bonded
Friction Material Composition:
Metallic
Inner Pad Friction Material Thickness:
0.72 in.
Inner Pad Friction Material Thickness:
18.2 mm
Inner Pad Overall Thickness:
0.205 in.
Inner Pad Width:
6.500 in.
Mounting Hardware Included:
Yes
Outer Pad Friction Material Thickness:
0.63 in.
Outer Pad Friction Material Thickness:
16.1 mm
Outer Pad Overall Thickness:
0.189 in.
Outer Pad Width:
6.500 in.
Pad Wear Sensor Included:
Yes
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems:
- The following should be conducted by a qualified technician:
Specifications:
Manufacturer Warranty:
12 Months
