ACDelco 14D249M Disc Brake Pad Set
for 1992 Ford Aerostar

ACDelco 14D249M Disc Brake Pad Set - 1992 Ford Aerostar


Brand:	ACDelco
Part Number:	14D249M
UPC:	00707773851920
Weight:	2.9 lbs
Condition:	New

Availability:	0 in Stock
	OUT OF STOCK

Product Information

Description:

Get the ACDelco 14D249M Disc Brake Pad Set for your 1992 Ford Aerostar. Buy now and secure your purchase online!

ACDelco Advantage Semi-Metallic Disc Brake Pads are formulated with steel strands to provide strength and conduct heat away from the rotor's surface while offering quality braking power. Also, hardware clip kits are included where applicable. ACDelco Advantage Semi-Metallic Disc Brake Pads are available for all makes and models. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

Features and Benefits:

Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Ceramic, Semi-Metallic, and Organic formulas provide safety and reliability for a range of vehicle applications
No curing or machining required, ready to be installed right out of the box

Specifications:

FMSI Number:

7125A

Friction Material Attachment:

Bonded

Friction Material Composition:

Metallic

Grade Type:

Regular

Inner Pad Friction Material Thickness:

0.39 in.

Inner Pad Friction Material Thickness:

9.8 mm

Inner Pad Overall Thickness:

0.209 in.

Inner Pad Width:

6.300 in.

Mounting Hardware Included:

Outer Pad Friction Material Thickness:

0.36 in.

Outer Pad Friction Material Thickness:

9 mm

Outer Pad Height:

2.460 in.

Outer Pad Overall Thickness:

0.209 in.

Outer Pad Width:

6.300 in.

Pad Shims Included:

Yes

Pad Wear Sensor Included:

Features and Benefits:

– Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
– Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
– Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
– Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
– Inspection of the brake hoses for brittleness or cracking.
– Inspection of wheel bearings and grease seals.
– Parking brake adjustments (as needed).
The following inspections and maintenance procedures can help prevent potential brake problems:
The following should be conducted by a qualified technician:

Specifications:

Country of Origin:

Manufacturer Warranty:

12 Months