Description:
CARDONE remanufactured Electrohydraulic Power Steering Pumps (EHPS) are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Features and Benefits:
- All critical components (cam packs, armature, reservoir, etc.) are tested to match O.E. performance standards.
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- All units are built with 100% new, O.E.-quality O-rings, seals, bearings and gaskets.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- During the engineering phase, every unit is tested to ensure perfect fit and function on the vehicle.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Shafts and surfaces are machined to precise specifications to eliminate premature wear and extend product life.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- To ensure reliable performance, final assembly is computer-tested to measure pressure, bypass, fluid flow, steering effort, current and noise.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Weak solder points are 100% reflowed to extend life expectancy.
Specifications:
Contains Electronic Components:
Circuit Board
FAA_A1:
Automobile manufacturers are favoring EHPS pumps because they result in better performance and fuel economy. EHPS pumps eliminate the belt and pulley rotational mass that a traditional pump would require.
FAA_A2:
An EHPS pump consists of an electronic motor and a hydraulic pump. The electronic motor generates the required RPMs for the pump to produce flow and pressure to supply the power steering system.
FAA_A3:
Most automobile manufactures do not recommend servicing individual components of an EHPS pump. These pumps are replaced as complete units.
FAA_A4:
Unlike traditional power steering pumps, the EHPS pumps require a 12-volt power supply. Most EHPS pumps will also require communication with an external module.
FAA_A5:
No. You must use the correct fluid specified in the O.E. service manual or owners manual of the vehicle being serviced.
FAA_A6:
An EHPS pump has a different appearance than a traditional power steering pump and is usually mounted on the passenger side behind the front bumper.
FAA_A7:
Yes. The hydraulic system must be flushed according to the O.E. service intervals. Failure do to so can cause premature damage to the EHPS pump and other power steering components.
FAA_A8:
Yes, a bleeding procedure must be performed, just like a traditional belt-driven power steering system.
Housing Material:
Aluminum; Plastic
Inlet Attachment Type:
Barb
Inlet Diameter:
0.402 in.
Is Or Contains A Battery:
No
Is Or Contains A Bulb:
No
Is Prop Sixty Five Affected:
No
Is the item CARB affected:
No
Mounting Hardware Included:
No
Outlet Attachment Type:
Bolt-On
Package Contents:
Electronic Hydraulic Power Steering Pump; Sealing Kit
Product Condition:
Remanufactured
Reservoir Cap Included:
No
Manufacturer Warranty:
36 Months
